Pitney Bowes OfficeRight DI380 Operator's Manual page 65

Message
MANUAL ADVAN-
CE COVER OPEN
DEFLECTOR
ERROR
DOUBLE FEED
DOUBLE FEED
CHECK STACKER
FOLD PLATES
NOT SET
MANUAL FEED
TIMEOUT
PAPER SHORT
PAPER SHORT
CHECK STACKER
SET LEVER
STREAM FEED
SDC639A
The Manual Advance Knob door is not fully
closed. Close door.
The function of half fold is not be possible due
to a fault. Remove Fold Plates and check for
any material.
A double feed has been detected being fed
from the feed tray indicated. Remove the
material from the machine and restart. If
double feeds persist, request another trial
piece.
A double feed has been detected being
fed from the feed tray indicated. Remove
the double feed from the stacker. Restart
machine.
The Fold Plates has not set to the correct
position. Remove Fold Plates and check for
any material. Refit Fold Plates and restart.
Material has not been detected being fed
from the feeder. In manual feed mode, the
material must be fed by a set time. Restart
the machine by pressing Start.
The material being used has been detected to
be too short in length. Check material length
being used matches the length displayed. If
correct, request another trial piece.
The material being used has been detected to
be too short in length. Check material length
being used matches the length displayed. If
correct, request another trial piece.
Manual feed lever in the incorrect position for
the mode of running. Move the manual feed
lever to the correct position.
(Left position:manual, Right:automatic).
The machine has detected two sheets being
fed together from the feed tray indicated.
Remove material from the machine, reload
and restart machine.
Reference • 4
Action
4-11