Repositioning The "Reed" Level Indicator Switches - Electrolux Built-in ovens Service Manual

3.3 - REPOSITIONING THE "REED" LEVEL INDICATOR SWITCHES

When repositioning the REED switches in their respective silicone rubber support and when
repositioning the assembly in the tank, make sure that when re-assembly is complete, the REED
switch is fully inserted (see Fig. 259).
If the switch is only partially inserted (see Fig. 258), this could result in false empty or full water
level indications.
Fig. 258
1 - SILICONE RUBBER SUPPORT
2 - "REED" SWITCH
Fig. 259
1 - PLASTIC SILICONE SUPPORT
2 - "REED" SWITCH
SOI 02.10 FV
"REED" SWITCH INSERTED INCORRECTLY
"REED" SWITCH INSERTED CORRECTLY
124/142 599 70 59-01