Removing The Tangential Fan Protection Box - Electrolux Built-in ovens Service Manual

2.17.3 - REMOVING THE TANGENTIAL FAN PROTECTION
To access the tangential cooling fan, you need to remove the tangential fan protection box by
unscrewing the 4 screws (see Fig. 228, 229 and 230).
Fig. 228
1 - GAS BURNER
2 - TANGENTIAL
FAN PROTECTION BOX
3 - FIXING SCREWS FOR THE
BOX, LEFT SIDE
4 - TORX SCREWDRIVER
Fig. 229
1 - TORX SCREWDRIVER
2 - FIXING SCREWS FOR THE
BOX, RIGHT SIDE
3 - TANGENTIAL FAN
PROTECTION BOX
To remove the fan protection box, once you have removed the screws:
1 - Lift up the box at the front (see Fig. 230)
Fig. 230
1 - TANGENTIAL FAN
PROTECTION BOX
SOI 02.10 FV 111/142 599 70 59-01