Electrolux Built-in ovens Service Manual page 56

2.6.3.4 - REMOVING THE TANGENTIAL FAN ON ELECTRONIC PYRO VERSION
To remove one of the components:
1 - Unfasten the fixing screws on the upper panel.
2 - Detach the connection wires for the tangential cooling fan
(or thermostat).
3 - Unfasten the fixing screws on the fan (or thermostat).
4 - Extract the component.
Fig. 105
1 - TEMPERATURE
CONTROL
POTENTIOMETER
2 - KRONOS CONTROL
UNIT BOARD
3 - FUNCTION SELECTOR
4 - POWER BOARD
OVC1000
5 - DOOR LOCK
6 - SAFETY THERMOSTAT
7 - DROP RESISTOR
8 - COOLING FAN
MOTOR
9 - FAN BODY
Fig. 106
1 - FIXING SCREWS FOR
COOLING FAN
2 - FAN MOTOR
3 - FAN BODY
4 - ELECTRICAL CONTACTS FOR
CONNECTION
SOI 02.10 FV 56/142 599 70 59-01