Indicator Lights; Special Functions; Cleaning Cycle - Electrolux 6 GN 1/1 User Manual

4. At the end, on the Time Display the flashing word End
appears to confirm the completed operation.
5. Remove the USB pendrive from the socket.
F.6

Indicator Lights

NOTE!
The indicator lights are not buttons, but only function
or warning lights.
ALARM
The light flashes to indicate the presence of a
malfunction. It can be a warning or an error.
USB
This light indicates the insertion of an USB
device. At the beginning it flashes, then when the
USB has been recognized it becomes fixed.
Wi-Fi
This light indicates the connection to a Wi-Fi
network (with appropriate accessory only).
F.7

Special functions

The special functions allow to improve the use of the oven and
can be used with more or less intensity.
WATER INJECTION
During a cooking cycle it is possible to increase
the humidity in the cavity for certain types of
cooking.
Press repeatedly this buttons to adjust the injection duration in
seconds (every dash = 10 s intervals).
In the figure above (for example) 3 dashes corresponding to 30
seconds of water injection are indicated.
WARNING
Open the door carefully, water is
sprayed onto the fan.
FAN
This function allows you to adjust the fan speed
for some types of cooking such as the most
delicate ones.
Press repeatedly the button above to adjust the 5 speed levels.
In the figure above (for example) 4 dashes corresponding to a
high speed are indicated.
A
B
F.8

Cleaning cycle

C
The oven is equipped for cleaning the cavity automatically.
D
1. Press repeatedly the button
E
cleaning cycles.
F
20
G
H
I
G
H
J
G
H
I
J
G
H
I J
to set one of the 5 available
J
Available cleaning cycles
CLn1 = Soft washing cycle
Cleaning for low dirt level, i. e. steaming,
baking or single loads with cooking temper-
atures lower than 200℃
CLn2 = Medium washing cycle
Cleaning for medium dirt, i. e. roasting or
baking with cooking temperatures lower
than 200℃
CLn3 = Strong washing cycle
Cleaning for medium-high dirt level with
roasted and grilling deposits
CLn4 = Extra-Strong washing cycle
Cleaning for high dirt level with heavy
roasted and grilling deposits from multiple
loads
CLn5 = Rinse cycle
Rinsing with cold water
2. Put the cleaning detergent into the centre bottom of the
cavity and the rinse & descale tablet into the dedicated
drawer (its position changes according to the model).
Quantities vary according to the selected cycle.
Check there are no items or accessories connected to the
oven in the cavity.
3. Close the door;
4. Press the button
Cleaning displays
The various displays will show the following text:
I
While setting cycle:
• Temperature display = selected cycle (in the example above
CLn2)
• Time display = estimated cycle duration.
After cycle is started:
• Temperature display = selected cycle (in the example above
CLn2)
• Time display = remaining time.
To ensure best cleaning results, as well as to protect the oven
with the cleaning programs, use the detergents, rinse aid and
descale agents suggested by Electrolux Professional.
IMPORTANT
Use only original or recommended maintenance/
cleaning products. Cleaning agents being not original
or not recommended by Electrolux Professional can
seriously damage the appliance.
Damages caused by using different cleaning and care
products than those recommended by the manufac-
turer are excluded from the warranty.
Wrong cleaning chemicals could leave behind chem-
ical residues in the cooking chamber and/or create
strong chemical reactions with severe consequences
inside the cavity, which in worse cases may turn into
explosion.
to start the cycle;
DETERGENTS