Removing The Rear Panel (Various Components And Lampholder); Rear View Of Normal Oven - Electrolux Built-in ovens Service Manual

2.4 - REMOVING THE REAR PANEL (various components and lampholder)

In order to remove the rear panel, simply remove the two upper screws.
Once the rear panel has been removed, the following components are accessible: the lampholder,
the various heating elements, the convection fan motor and the terminal board with cable clamp.

2.4.1 - REAR VIEW OF NORMAL OVEN

Fig. 48
1 - GRILL HEATING ELEMENT
2 - TOP PANEL HEATING
ELEMENT
3 - LAMPHOLDER
4 - COOLING FAN
CONTROL
THERMOSTAT
5 - CONVECTION FAN
SOI 02.10 FV
6 - CONVECTION HEATING ELEMENT
7 - EARTH CONNECTION
8 - TERMINAL BOARD
9 - CABLE CLAMP
10 - BOTTOM HEATING ELEMENT
25/142 599 70 59-01