Section 7
2. To remove the actuator, (fi gure 7.16.1) there
are 2 sets of attaching hardware, remove both
sets of bolts. A 3mm key is utilized or ratchet to
remove plate (fi gure 7.16.2)
fig. 7.16.1
fig. 7.16.2
3. The Second actuator bolt can be located as
shown in (fi gure 7.16.3) To remove, use a 13mm
open end wrench on nut and slip bolt out of
assembly.
fig. 7.16.3
PAGE 7.16
QM-7 SERIES SERVICE MANUAL
JANUARY 2012
SUNRISE MEDICAL