Quickie QM-7 Series Service Manual page 63

2. Remove the rear Recline shroud. This will
allow access to the ISM control Module.
(fi gure 7.11.1)
3. Use a 9/64" Hex wrench to remove the socket
head cap screws that attach the ISM mount to the
recline structure (fi gure 7.11.2).
4. Use the same wrench to loosen (Do not
Remove) the bottom two socket head cap screws.
(fi gure 7.11.3)
SUNRISE MEDICAL
Section 7
QM-7 SERIES SERVICE MANUAL JANUARY 2012
PAGE 7.11
fig. 7.11.1
fig. 7.11.2
fig. 7.11.3