Performance Specifications - Focusrite RedNet Installation Manual

PERFORMANCE SPECIFICATIONS

Microphone Inputs
Gain range
Type
Max. input level
Min. input level
Frequency response
THD+N
Noise
Phantom power
Signal-to-noise ratio
Line Inputs
Gain range
Max. input level
Min. input level
Frequency response
THD+N
Signal-to-noise ratio
Instrument Inputs (Inputs 1 & 2 only)
Gain range
Max. input level
Min. input level
Frequency response
THD+N
Signal-to-noise ratio
Analogue High-Pass Filters
Selection
Frequency/slope
Crosstalk
Input to input
Digital Performance
Supported sample rates
Clock sources
0 dB; 8 to 63 dB in 1 dB steps
Classic ISA-based, electronically balanced, Z
+16 ±0.5 dBu; min. gain for 0 dBFS, R
-47 ±0.5 dBu; max. gain for 0 dBFS, R
20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, f
< 0.0007% @ -1 dBFS; +15 dBu input, R
EIN -128 dB; 60 dB gain, R
48 V, independently switchable per-channel
119 dB 'A'-weighted; R
s
-12 to 42 dB in 1 dB steps
+24 ±0.5 dBu; min. gain for 0 dBFS
-30 ±0.5 dBu; max. gain for 0 dBFS
20 Hz – 20 kHz ±0.1 dB
< 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz – 22 kHz
117 dB 'A'-weighted
+14 to 68 dB in 1 dB steps
+17 ±0.5 dBu; min. gain for 0 dBFS
-37 ±0.5 dBu; max. gain for 0 dBFS, pad out
20 Hz – 20 kHz ±0.1 dB
< 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz – 22 kHz
112 dB 'A'-weighted
Independently switchable per-channel
-6 dB @ 65 ±3 Hz, 12 dB/octave
<-80 dB (all other channels at 0 dBFS)
44.1 / 48 / 88.2 / 96 / 192 kHz
Internal or from network master device
= 2.4 kohms
in
= 150 ohms, pad out
s
= 150 ohms, pad out
s
= 192 kHz); R
s
= 150 ohms, 20 Hz – 22 kHz
s
= 150 ohms, 20 Hz – 22 kHz
s
= 150 ohms
= 150 ohms
s
29