Performance Specifications - Focusrite RedNet Installation Manual

PERFORMANCE SPECIFICATIONS

Inputs
AES/EBU inputs
AES/EBU connector
ADAT inputs
ADAT connectors
S/PDIF input
S/PDIF connector
AES/EBU Input Sampe Rate Converters
Input sample rate range
Gain error
Dynamic Range
THD+N
Outputs
AES/EBU outputs
AES/EBU connector
ADAT outputs
ADAT connectors
S/PDIF output
S/PDIF connector
Operating Modes
AES/EBU mode
ADAT mode
Digital Performance
Supported sample rates
Clock sources
Local clock sources
External word clock range
Power
PSU
* Sample rate dependent – max. 16 channels at 192 kHz
22
8 channels, with switchable SRC
25-way female Dsub, wired to AES 59 (combined I/O)
32 channels @ 44.1 / 48 / 88.2 / 96 kHz sample rate; 16 channels @
192 kHz
TOSLINK lightguides x 8
2 channels, with switchable SRC 44.1 to 192 kHz
Phono (RCA) socket
32 to 216 kHz
-0.3 dB
> 138 dB (-60 dBFS method)
< -130 dB (0.00003%); 0 dBFS input
8 channels, sync-locked to RedNet system sample rate
See "Inputs"
32 channels @ 44.1 / 48 / 88.2 / 96 kHz sample rate; 16 channels @
192 kHz
TOSLINK lightguides x 8
2 channels, sync-locked to RedNet system sample rate
Phono (RCA) socket
AES/EBU inputs – Chs. 1 to 8; ADAT inputs – Chs. 9 to 32*; AES/EBU
outputs – Chs. 1 to 8; ADAT outputs – Chs. 1 to 32*
ADAT inputs – Chs. 1 to 32*; AES/EBU outputs – Chs. 1 to 8; ADAT
outputs – Chs. 1 to 32*
44.1 / 48 / 88.2 / 96 / 192 kHz
Local or from network master device
Internal, Word Clock input, AES input 1, ADAT input 1, S/PDIF input
Sample rate ±7.5%
Internal, 100 - 240 V, consumption 30 VA