Performance Specifications - Focusrite RedNet Installation Manual

PERFORMANCE SPECIFICATIONS

Inputs
Analogue line inputs
Connector
0 dBFS reference levels
Frequency response
THD+N
Dynamic range
Converter dynamic range
Signal-to-noise ratio
Outputs
Analogue line outputs
Connector
0 dBFS reference levels
Frequency response
THD+N
Dynamic Range
Converter dynamic range
Signal-to-noise ratio
Crosstalk
Input or Output to Input
Input or Output to Output
Digital Performance
Supported sample rates
Clock sources
Power
PSU
Front Panel Indicators
Power
Network connected
Sync lock
Sample rate
Input/Output range
Input/Output signal level
16
25-way female Dsub x 2, wired to AES 59
+18 or +24 dBu (switchable)
20 Hz – 20 kHz ±0.05 dB
< 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz
119 dB 'A'-weighted (-60 dBFS method)
120 dB
119 dB 'A'-weighted; 20 Hz – 20 kHz
16
25-way female Dsub x 2, wired to AES 59
+18 or +24 dBu (switchable)
20 Hz – 20 kHz ±0.15 dB
< 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz
119 dB 'A'-weighted (-60 dBFS method)
120 dB
119 dB 'A'-weighted; 20 Hz – 20 kHz
< -90 dB (all other channels at 0 dBFS)
< -100 dB (all other channels at 0 dBFS)
44.1 / 48 / 88.2 / 96 / 192 kHz
Internal or from network master device
Internal, Universal type, consumption 68 VA
Green
Green
Green
Yellow x 5
Yellow x 2
Bi-colour x 32 (Green = -42 dBFS; Orange = -6 dBFS; Red = overload)
15