Rednet 6; Unit Connections And Features; Rednet 5 - Front Panel - Focusrite RedNet Installation Manual

REDNET 6

UNIT CONNECTIONS AND FEATURES

RedNet 6 - Front Panel
1 . AC Power Switch
2 . Power Indicator
3 . RedNet Network Status Indicators:
• • CONNECTED – illuminates when the unit is connected to an active Ethernet network.
• • LOCKED –
RedNet 6 unit is network master. When an incoming clock signal is invalid, the Locked
indicator will flash to indicate that the unit has reverted to using its internal clock.
4 . RedNet Sample Rate Indicators:
• • Five yellow indicators. The Indicators illuminate individually or in combination to
indicate 44 .1 kHz, 48 kHz, x2 multiple (of 44.1 or 48), x4 multiple (of 48) and sample rate
Pull Up/Down. For example, for a 96kHz pull up/down setting, the 48kHz, x2 and Pull Up/
Down indicators will illuminate.
5 . RedNet Clock Source Indicators:
When RedNet 6 is the clock master of the Dante network, one of the following indicators will
illuminate.
INTERNAL – illuminates to indicate the internal RedNet 6 sync clock is in use.
• •
MADI INPUT – illuminates to indicate an external MADI sync clock is in use.
• •
• • WORD CLOCK – illuminates to indicate an external Word Clock sync clock is in use.
6 . MADI Input Indicators:
If a selected input signal is either invalid or not present the input source indicator will flash.
• • COAXIAL – illuminates to indicate that coaxial connection is operational.
• • OPTICAL – illuminates to indicate that optical connection is operational.
2 3 4
illuminates when a valid sync signal is received from the network or the
5 6 7 8
1
42