Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Grandstream Networks HandyTone-496
Summary of Contents for Grandstream Networks HandyTone-496
-
Page 1: User Manual
User Manual HandyTone-496 Analog Telephone Adaptor For SW Release Version 1.0.0.9 Grandstream Networks, Inc. www.grandstream.com... -
Page 2: Table Of Contents
HandTone-496 User Manual Grandstream Networks, Inc. Table of Contents WELCOME........................3 INSTALLATION ......................4 WHAT IS INCLUDED IN THE PACKAGE ............... 6 ....................6 AFETY OMPLIANCES PRODUCT OVERVIEW ....................7 ......................7 EATURES ..................8 ARDWARE PECIFICATION BASIC OPERATIONS ....................9 ................ -
Page 3: Welcome
HandTone-496 User Manual Grandstream Networks, Inc. Welcome Congratulations on becoming an owner of HandyTone-496. You made an excellent choice and we hope you enjoy all of its capabilities. Grandstream's HandyTone-496 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. -
Page 4: Installation
HandTone-496 User Manual Grandstream Networks, Inc. Installation HandyTone-496 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HandyTone-496 VoIP functionalities are available via regular analog telephones. The following photo illustrates the appearance of a HandyTone-496. - Page 5 HandyTone-496 has two FXS ports. The RJ11 jack next to the LAN is called FXS port 1 and the RJ11 jack on the side of the HandyTone-496 is called FXS port 2. Each FXS port can have a separate SIP account. This is a key feature of HandyTone-496. Both ports can make calls concurrently.
-
Page 6: What Is Included In The Package
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Grandstream Networks, Inc.. -
Page 7: Product Overview
HandTone-496 User Manual Grandstream Networks, Inc. Product Overview Key Features • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. • Built-in router, NAT, Gateway and DMZ port forwarding •... -
Page 8: Hardware Specification
HandTone-496 User Manual Grandstream Networks, Inc. Hardware Specification The table below lists the hardware specification of HandTone-496. Model HandTone-496 LAN interface 1xRJ45 10Base-T WAN interface 1xRJ45 10Base-T FXS telephone port 2xFXS Button Green and red color Universal Switching Input: 100-240VAC 50-60 Hz... -
Page 9: Basic Operations
HandTone-496 User Manual Grandstream Networks, Inc. Basic Operations Get Familiar with Voice Prompt HandTone-496 has stored a voice prompt menu for quick browsing and simple configuration. Currently, the voice prompt menu and the LED button are designed for FXS port 1 only. -
Page 10: Make Phone Calls
HandTone-496 User Manual Grandstream Networks, Inc. Make Phone Calls 5.2.1 Calling phone or extension numbers To make a phone or extension number call: a) Dial the number directly and wait for 4 seconds (default “No Key Entry Timeout”). Or b) Dial the number directly, and press # (assuming that “Use # as dial key” is selected in web configuration). -
Page 11: Blind Transfer
HandTone-496 User Manual Grandstream Networks, Inc. Examples: If the target IP address is 192.168.0.160, the dialing convention is Voice Prompt with option 47, then 192168000160 followed by pressing the “#” key if it is configured as a send key or wait 4 seconds. In this case, the default destination port 5060 is used if no port is specified. -
Page 12: Call Features
HandTone-496 User Manual Grandstream Networks, Inc. Note: When intended Transfer failed, if A hangs up, the HandTone-496 will ring user A again to remind A that B is still on the call, by pressing FLASH or Hook again will restore the conversation between A and B. -
Page 13: Led Light Pattern Indication
HandTone-496 User Manual Grandstream Networks, Inc. LED Light Pattern Indication Following tables show the LED light pattern indication. RED LED indicates abnormal status DHCP Failed or WAN No Cable Button flashes every 2 seconds (if DHCP is configured) HandTone-496 fails to register... -
Page 14: Configuration Guide
HandTone-496 User Manual Grandstream Networks, Inc. Configuration Guide Configuring HandTone-496 WAN IP through Voice Prompt 6.1.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable HandTone-496 to use DHCP. 6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable HandTone-496 to use STATIC IP mode, then use option 02, 03, 04 to set up HandTone-496’s IP, Subnet Mask, Gateway respectively. - Page 15 Password Login All Rights Reserved Grandstream Networks, Inc. 2004 The password is case sensitive and the factory default password for End User is “123”. After a correct password is entered in the login screen, the embedded Web server inside the HandTone-496 will respond with the Configuration page which is explained in details below.
-
Page 16: Time Zone
" UDP Only" WAN port LAN IP port Protocol Update All Rights Reserved Grandstream Networks, Inc. 2004 This contains the password to access the Web Configuration Menu. This End User field is case sensitive. Password IP Address There are 2 modes under which the HandyTone ATA can operate: - If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The... - Page 17 Product Model: HT496 Software Version: Program-- 1.0.0.9 Bootloader-- 1.0.1.0 HTML-- 1.0.0.0 VOC-- 1.0.0.9 System Up Time: 2 day(s) 0 hour(s) 44 minute(s) Registered: Yes PPPoE Link Up: disabled detected NAT type is full cone All Rights Reserved Grandstream Networks, Inc. 2005...
-
Page 18: Advanced User Configuration
Grandstream Device Configuration Password Login All Rights Reserved Grandstream Networks, Inc. 2004 Advanced User configuration includes not only the end user configuration, but also advanced configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration. Following is a snap shot of the advanced configuration page. - Page 19 HandTone-496 User Manual Grandstream Networks, Inc. Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS Admin Password: (purposely not displayed for security protection) FXS Port 1: sip.mycompany.com SIP Server: (e.g., sip.mycompany.com, or IP address) Outbound Proxy: (e.g., proxy.myprovider.com, or IP address, if any)
- Page 20 HandTone-496 User Manual Grandstream Networks, Inc. 5062 local SIP port: (default 5062) 5008 local RTP port: (1024-65535, default 5008) Enable Call Yes (if Yes, Call Forwarding & Call-Waiting-Disable are Features: supported locally) Send DTMF: in-audio via RTP (RFC2833) via SIP INFO...
- Page 21 HandTone-496 User Manual Grandstream Networks, Inc. Dial Plan Prefix: (this prefix string is added to each dialed number) No Key Entry (in seconds, default is 4 seconds) Timeout: Use # as Dial Key: Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)
- Page 22 Yes (WAN side access to http server will be rejected if set to access: Update All Rights Reserved Grandstream Networks, Inc. 2005 Admin Password This contains the password to access the Advanced Web Configuration page. This field is case sensitive.
- Page 23 HandTone-496 User Manual Grandstream Networks, Inc. Preferred Vocoder The HandyTone ATA supports up to 7 different Vocoder types including G.711 A-/U-law，G.723.1, G.726, G.728, G.729A/B, iLBC. Depending on the product model, some of these Vocoders may not be provided in standard release.
- Page 24 HandTone-496 User Manual Grandstream Networks, Inc. Layer 2 QoS This contains the value used for layer 2 VLAN tag. Default setting is blank. Use DNS SRV: Default is No. If set to Yes the client will use DNS SRV for server lookup...
- Page 25 HandTone-496 User Manual Grandstream Networks, Inc. TFTP Upgrade This is the IP address of the configured TFTP server. If it is non-zero or not blank, the HandyTone ATA will attempt to retrieve new configuration file or Server new code image from the specified TFTP server at boot time. It will make up to 3 attempts before timeout and then it will start the boot process using the existing code image in the Flash memory.
- Page 26 HandTone-496 User Manual Grandstream Networks, Inc. Send Anonymous If this parameter is set to “Yes”, the “From” header in outgoing INVITE message will be set to anonymous, essentially blocking the Caller ID from displaying. Lock keypad If this parameter is set to “Yes”, the configuration update via keypad is disabled.
-
Page 27: Saving The Configuration Changes
STATUS BASIC SETTINGS ADVANCED SETTINGS Your configuration changes have been saved. They will take effect on next reboot. All Rights Reserved Grandstream Networks, Inc. 2004 Users are recommended to power cycle the HandTone-496 after seeing the above message. 6.2.5 Rebooting the HandTone-496 from Remote The administrator of the HandTone-496 can remotely reboot the HandyTone ATA by clicking on the “Reboot”... -
Page 28: Configuraentraltion Through Aentral Centraentrall Server
HandTone-496 User Manual Grandstream Networks, Inc. Configuration through a Central Server Grandstream HandyTone ATAs can be automatically configured from a central provisioning system. When HandyTone ATA boot up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “cfg.txt” and the other is “cfg000b82xxxxxx”, where “000b82xxxxxx”... -
Page 29: Software Upgrade
HandTone-496 User Manual Grandstream Networks, Inc. Software Upgrade Upgrade through HTTP To upgrade software, HandTone-496 can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycompany.com:6688/Grandstream/1.0.0.4 Where firmware.mycompany.com is the FQDN of the HTTP server, “:6688”... - Page 30 HandTone-496 User Manual Grandstream Networks, Inc. NAT-friendly TFTP server on the public Internet for firmware upgrade. Please check the Service section of Grandstream’s Web site to obtain this TFTP server’s IP address.
-
Page 31: Restore Factory Default Setting
HandTone-496 User Manual Grandstream Networks, Inc. Restore Factory Default Setting Warning Restore the Factory Default Setting will delete all configuration information of the device. Please disconnect network cable and power cycle the unit before trying to reset the unit to factory default.