Regular Checks; Checking Operation - Danfoss DHP-H User Manual

6

regular checks

6 .1

Checking operation

During normal operation, the alarm indicator lights green continuously to show that every-
thing is OK. When the alarm is triggered, it flashes green at the same time as a text message
is shown in the display.
Regularly check the alarm indicator to ensure that the installation is working correctly. It is
not always the case that you will notice a problem with the installation, for example, in the
event of a fault with the compressor the auxiliary heater starts automatically (operating mode
AUTO). For further information about alarms, see the "Troubleshooting" section.
ALARM
LOWPRESS ERROR
Figure 18: Flashing alarm indicator in the event of an alarm .
VUBMA102 Danfoss –