Danfoss DHP-H User Manual page 21

Message Meaning
LOWPRESS Alarm that indicates that the low pressure switch has deployed.
ERROR
MOTOR P Alarm that indicates that the motor protection has deployed.
ERROR
BRINEFLOW Appears if the accessory flow switch is installed. Indicates that the flow in
LOW the brine system is low.
SENSOR Alarm that indicates a faulty sensor.
HEATPUMP Indicates that the compressor will start within 0 seconds. The brine
START pump has started.
HEATPUMP+ Indicates that heat production is active with both compressor and auxil-
ADD.HEAT iary heater.
START – -MIN Indicates that there is a heating production demand and will start in the
specified number of minutes.
ADD. HEAT Indicates that there is an auxiliary heater demand.
Text specific to DHP-a
Appears with applicable heat pump operating status text.
Message Meaning
DEFROST Indicates the temperature for defrost.
VUBMA102 Danfoss – 21