Danfoss DHP-H User Manual page 43

Term
ROOM
Heat transfer fluid
circuit
Heat curve
Explanation
If ROOM shows 20°C the heat curve is not affected. If ROOM shows
higher or lower, this indicates that the heat curve has been adjusted
up or down to change the indoor temperature.
The fluid circuit obtains heat/energy from the refrigerant circuit,
which it then transports to the water tank or heating system. See
the "About your heat pump" section for further information.
The control computer determines the correct temperature of the
water to be distributed to the heating system based on the heat
curve. The indoor temperature is adjusted by changing the gradient
of the heating system's CURVE.
VUBMA102 Danfoss –