Selecting Vessels To Be Automatically Polled - Standard Horizon HX870 Owner's Manual

10.10.3 Selecting Vessels to be Automatically Polled

The radio uses the individual directory to select vessels to be auto-
matically polled. Refer to section "10.5.1 Setting up the Individual
/ Position Call Directory" and to enter MMSI of vessels you want to
poll before proceeding.
1. Press the MENU key to display "MENU",
select "DSC CALL" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
2. Press the CH▼/CH▲ key to select "AUTO
POS POLLING", then press the [SELECT]
soft key.
3. Press the CH▼/CH▲ key to select the
"SELECT ID", then press the [SELECT] soft
key.
4. The radio will show a blank row highlighted
when you select the vessel for the first time.
Press the [SELECT] soft key.
5. The radio will show the vessels programmed
in the individual directory. Press the CH▼/
CH▲ key to select the desired vessel and
press the [ENTER] soft key.
6. For more entries, press the CH▼/CH▲ key
to select a blank row, press the [SELECT]
soft key, then perform step 5.
7. When finished, press the CLR key to exit to
the radio mode.
HX870
NOTE
AUTO POS POLLING
ACTIVATION
SELECTED ID
BACK
INDIVIDUAL DIR.
KAREN
BOB
366901254
Horizon-1
Standard
Horizon-2
USCG
BACK
DSC CALL
DIST ALERT MSG
POLLING
AUTO POS POLLING
DSC LOG
DSC TEST
DSC LOOP BACK
BACK
AUTO POS POLLING
SELECTED ID
000000000
SELECT
MEMORY
BACK DELETE
AUTO POS POLLING
SELECTED ID
KAREN
ENTER
BACK DELETE
Page 71
SELECT
SELECT
SELECT