Standard Horizon HX870 Owner's Manual page 80

Navigation by Manually Entering a Waypoint
1. Press the MENU key to display "MENU".
2. Select "NAVI" with the CH▼/CH▲/◄/►key,
then press the [SELECT] soft key.
3. Select "WAYPOINT" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select "MANUAL" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. If you want to give the waypoint an easy-
to-find name, select "NAME" with the CH▼/
CH▲ key, press the [SELECT] soft key, then
enter the name. For details, refer to "10.5.1
Setting up the Individual / Position Call
Directory".
6. Select "POSITION" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
7. Press the CH▼/CH▲/◄/► key to select
the first number of latitude, then press
the [SELECT] soft key to step to the next
number.
8. Repeat step 7 to set the position.
If a mistake was made, press the CH▼/CH▲/◄/► key to select "←" or
"→", press the [SELECT] soft key until the wrong character is selected,
then perform step 7.
9. When finished programming the position, press the [FINISH] soft key. The
display will return to the previous screen.
10. Select "SAVE & GO" with the CH▼/CH▲ key, then press the [SELECT] soft
key. The navigation screen will appear.
The screen includes the distance and direction to the destination, and the
waypoint is indicated by a dot () inside the compass.
11. Press ◄/► key, then press the [STOP] soft key to stop the navigation.
Page 80
WAYPOINT
ROUTE
WAYPOINT
HISTORY
MEMORY
MANUAL
BACK
NAME:
BACK SELECT POSITION:
WAYPOINT
POSITION
Lat --˚--.---
-
BACK
Lon ---˚--.---
-
NAME:
1 2 3 4 5 6 7 8 9 0 S N
Delete
POSITION:
BACK FINISH SELECT
BUSY USA HI
25
WPT
DW-16
BACK
BRG
T
300
°
DST
km
35.2
SOG
kph
N-UP 20nm 36.0
WPT 001WPT
NAVI
SELECT
WAYPOINT
001WPT----------
-- ° --.---
-
--- ° --.---
-
SAVE
SAVE & GOTO
SELECT
WAYPOINT
----------
001WPT
24 ° 25.975
N
118 ° 59.456
W
GOTO
SAVE & GOTO
SELECT
HX870