Display Contrast; Key Beep - Standard Horizon HX870 Owner's Manual

13.3 DISPLAY CONTRAST

The display contrast can be adjusted to suit your operation environment.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "CONTRAST" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired level. The contrast level can be set
from "0" to "30" ("10" is default).
6. Press the [ENTER] soft key to store the
selected level.
7. Press the CLR key to return to radio operation.

13.4 KEY BEEP

This selection is used to select the beep tone volume level when a key is
pressed.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "KEY BEEP" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired level. The beep level can be set from
"LEVEL 1" to "LEVEL 5", or "OFF".
6. Press the [ENTER] soft key to store the
selected level.
7. Press the CLR key to return to radio operation.
HX870
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
CONFIGURATION
GPS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT
BACK
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
CONFIGURATION
GPS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT
BACK
SETUP
SELECT
CONFIGURATION
CONTRAST
30
ENTER
SETUP
SELECT
CONFIGURATION
KEY BEEP
3
ENTER
Page 95