Location Format; Time Offset; Time Area; Time Format - Standard Horizon HX870 Owner's Manual

16.4 LOCATION FORMAT

This menu item selects the coordinate system to be shown on the HX870
display. The default setting is "ddd mm.mmm".
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "GPS SETUP" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select "LOCATION FORMAT" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired coordinate system. The location
format can be selected from "ddd°mm.mmm",
"ddd°mm.mm", and "ddd°mm'ss"".
6. Press the [ENTER] soft key to save the new
setting.
7. Press the CLR key to return to radio operation.

16.5 TIME OFFSET

Sets the local time offset between UTC (Universal Time Coordinated) and local
time shown on the display. The offset is added or subtracted from the time
received from the GPS.
Refer to section "6.4 CHANGING THE GPS TIME" for details.

16.6 TIME AREA

This menu selection allows the radio to show UTC time or local time with the
offset.
Refer to section "6.5 CHANGING THE TIME LOCATION" for details.

16.7 TIME FORMAT

This menu selection allows the radio to show time in 12-hour or 24-hour format.
Refer to section "6.6 CHANGING THE TIME FORMAT" for details.
HX870
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
GPS SETUP
GPS ON/OFF
ON
ATIS SETUP
POWER SAVE
DIRECTION
BACK
LOCATION FORMAT
TIME OFFSET
TIME AREA
LOCATION FORMAT
TIME FORMAT
BACK SELECT
BACK
SETUP
SELECT
GPS SETUP
ddd mm.mmm °
ddd mm.mm °
ddd mm'ss" °
ENTER
Page 115