Dsc Beep; Summary Of The Dsc Setup Menu - Standard Horizon HX870 Owner's Manual

15.11 DSC BEEP

This feature allows the alarm beeps to be turned on or off when a DSC call
is received. The DSC calls that can be customized are: individual, group, all
ships, position request, and position report.
Refer to section "10.6.4 Setting up the Group Call Ringer" for details.

15.12 SUMMARY OF THE DSC SETUP MENU

Item
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
CH SWITCH TIMER
NO ACT (ACTION)
TIMER
POS FIX WAIT
DSC BEEP
Page 112
Description
Enter or edit addresses used for individual
call
Selects a reply to individual call
Selects the message to be sent automati-
cally as an individual call acknowledge-
ment
Selects the ringing time when an individual
call or a position request is received
Enter or edit addresses used for group call
Selects the AUTO POS POLLING opera-
tion type
Selects the transmission interval of AUTO
POS POLLING signal
Selects the delay time to move to the
requested channel automatically after
receiving a distress call, All Ship call, or
group call
Selects the delay time to return to radio
operation automatically after no key press
Sets the maximum wait time to obtain posi-
tion information when receiving a distress
call, POS Report call, or acknowledgement
to POS request call
Turns on or off the audible alarm when
receiving a DSC call
Default Value
−
MANUAL
ENABLE
2 min
−
AUTO POS REQUEST
30 sec
30 sec
15 min
15 sec
Indivi.: On
All Ship: On
Group: On
POS RQ.: Off
POS RP.: On
Geog.: On
Polling: Off
Test Call: Off
HX870