Standard Horizon HX870 Owner's Manual page 83

Editing a Waypoint
This function allows a previously entered waypoint to be edited.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Press the CH▼/CH▲ key to select "WAYPOINT
SETUP", then press the [SELECT] soft key.
4. Press the CH▼/CH▲ key to select
"WAYPOINT DIR.", then press the [SELECT]
soft key.
5. Select "EDIT" with the CH▼/CH▲ key, then
press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the
waypoint to be edited, then press the
[SELECT] soft key to show the waypoint
input display.
7. Select "NAME" or "POSITION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
8. Press the CH▼/CH▲/◄/► key to select
"←" or "→", press the [SELECT] soft key
until the character to be changed is selected,
then enter a new character.
9. Repeat step 8 until the waypoint is updated.
When finished editing, press the [FINISH] soft key.
10. Select "SAVE" with the CH▼/CH▲ key, then press the [SELECT] soft key
to store the edited waypoint into memory.
11. Press the CLR key to return to radio operation.
HX870
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
WAYPOINT SETUP
GPS SETUP
MARK POSITION
ATIS SETUP
WAYPOINT DIR.
ROUTE DIR.
BACK
DISPLAY RANGE
ARRIVAL RANGE
WAYPOINT SETUP
ROUTING OPERATION
BACK SELECT
WAYPOINT DIR.
EDIT
366901254
BOB
BACK
Horizon-1
Horizon-2
KAREN
NAME:
Standard
STANDARD---------
USCG
POSITION:
BACK SELECT
BACK
SETUP
SELECT
WAYPOINT DIR.
ADD
EDIT
DELETE
SELECT
WAYPOINT DIR.
34 ° 25.975
S
118 ° 59.456
W
SAVE
ENTER
Page 83