Pairing Settings
Pair Scanner with Cradle
The scanner and cradle must be paired for communication to occur. A cradle can be paired with multiple
scanners.
You need to perform this operation manually: After the scanner and cradle are powered on, insert the
scanner in the cradle and then press the "M" button on the cradle. The scanner beeps on a successful
pairing.
Pairing the scanner to another cradle can remove the previous pairing.
Note: The number of scanners allowed to pair with a cradle varies from one application to another.
Consult our technical support if you need more information.
Search Paired Scanners
When the scanner and cradle are powered on, press the "M" button on the cradle and the paired
scanner(s) will beep.
19
【Enter Setup】
**【Exit Setup】