Removing A Pc Card; Installing A Dimm Card; Figure 4-2 Installing A Dimm Card; Table 4-1. Dimm Card Sizes - Fujitsu Stylistic 3400 Technical Reference Manual

Removing a PC Card

To remove a PC Card,
1. Stop the PC Card using the appropriate features of your operating system.
2. Press the Eject button for the PC Card slot.
3. Pull the PC Card all the way out of the slot.

Installing a DIMM Card

One of the following DIMM cards can be installed in the Stylistic 3400 pen tablet:
FMW28EM32
FMW28E64
FMW28EM128
Only one DIMM socket is available on the pen tablet. You will need to remove any DIMM card currently
installed in the system before you can install a new DIMM card. See "Removing a DIMM Card" on page
37 for details.
To install a DIMM card in the pen tablet,
1. Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu. (Do
not attempt to remove or install a DIMM card when the system is in Suspend mode or running.)
2. Remove the two screws from the cover plate on the back of the pen tablet and remove the cover plate
as shown in Figure 4-2.
3. Insert the DIMM card in the socket at an angle and push it down until it locks into place. Note that the
DIMM card is keyed to prevent it from being inserted backwards.
36 Installing Hardware Options

Table 4-1. DIMM Card Sizes

DIMM Card Number

Figure 4-2 Installing a DIMM Card

SDRAM Size
32MB SDRAM
64MB SDRAM
128MB SDRAM
4
4