Table of Contents
Advertisement
Chapter 6
Installing Hardware Options
This chapter provides procedures for installing PC Cards and DIMM cards. (For details on replacing the Tablet PC's
internal IDE hard disk drive, refer to "Removing the Hard Disk Drive" on page 53.)
Installing a PC Card
You can install a PC Card while the system is running, when the system is off, or when system operation is
suspended.
To install a PC Card,
1. With the arrow on the PC Card facing up, insert the card through the shutters in the PC Card slot, as shown in
Figure 6-1.
2. Push the PC Card into the slot until it is seated.
3. If necessary, install any driver or application software necessary to use your PC Card.
The PC Card is now installed and you can use the PC Card with your system.
PC Card slot
Removing a PC Card
To remove a PC Card,
1. Stop the PC Card using the appropriate features of your operating system.
2. Press the Eject button for the PC Card slot.
3. Pull the PC Card all the way out of the slot.
Eject button
Figure 6-1 Installing a PC Card
6
6
48
Advertisement
Table of Contents
