Installing Hardware Options; Installing A Pc Card; Figure 4-1 Installing A Pc Card - Fujitsu Stylistic 3400 Technical Reference Manual

Hide thumbs Also See for Stylistic 3400:

Table of Contents

Chapter 4

Installing Hardware Options

This chapter provides procedures for installing PC Cards and DIMM cards. (For details on replacing the

pen tablet's internal IDE hard disk drive, refer to "Removing the Hard Disk Drive" on page 83.)

You can install a PC Card while the system is running, when the system is off, or when system operation

is suspended.

To install a PC Card,

1. With the arrow on the PC Card facing up, insert the card through the shutters in the PC Card slot, as

shown in Figure 4-1.

2. Push the PC Card into the slot until it is seated.

3. If necessary, install any driver or application software necessary to use your PC Card. Do not,

however, install any Card Services or Socket Services software provided with your PC Card. Card and

Socket Services are configured automatically by the operating system.

The PC Card is now installed and you can use the PC Card with your system.

PC Card slot

Eject button

Table of Contents