Fujitsu Stylistic 3400 Technical Reference Manual page 35

Table 3-15. BIOS Setup Power Savings Options (Continued)
Option
Auto Suspend Timeout
Suspend Mode
Auto Save-To-Disk
Resume On Modem Ring
Resume On Time
Resume Time
ADVANCED FEATURES
SUBMENU
Settings
Off
5 Minutes
10 Minutes
15 Minutes
20 Minutes
30 Minutes
40 Minutes
60 Minutes
Suspend
Save To Disk
Off
After 1 Hour
Off
On
Off
On
00:00:00
Description
Determines the amount of time elapsed with no system
activity before system operation is suspended
automatically.
Determines the suspend mode used when you press
the Suspend/Resume button or when the Suspend
Mode Timeout expires.
Selecting [Suspend] also allows you to configure the
Save-To-Disk Timeout option.
Note: You must choose [Suspend] to use the Resume
On Modem Ring and Resume On Time options. If [Save
To Disk] is selected, and either Resume On Modem
Ring or Resume On Time are enabled, the system will
suspend to RAM and won't save to disk.
Determines whether the system automatically performs
a save-to-disk operation after 1 hour in Suspend mode.
To use this feature, the Suspend Mode option must be
set to [Suspend].
Select [On] to configure the system to resume operation
when an incoming call is detected by your modem.
This feature will detect a modem ring on the built-in
modem, a modem installed in a PC Card slot, or an
external modem connected to a serial port; however,
implementation of the ring indicator function differs
between modem vendors, so this feature may not be
supported by some third-party modems.
To use this feature, the Suspend Mode option must be
set to [Suspend]. If [Save To Disk] is selected, and
Resume On Modem Ring is On, the system will
suspend to RAM and won't save to disk.
Select [On] to configure your system to resume
operation at the time of day specified in the Resume
Time field.
To use this feature, the Suspend Mode option must be
set to [Suspend]. If [Save To Disk] is selected, and
Resume On Time is On, the system will suspend to
RAM and won't save to disk.
Determines time of day system will resume when the
Resume On Time option is On. Enter the time of day in
HH:MM:SS format. Note: system uses a 24-hour clock.
Select this submenu to further refine power
management BIOS options. See Table 3-16 for more
information.
BIOS Setup 22