Figure A-3: Removing The Hard Disk Drive, Part 1; Figure A-4: Removing The Hard Disk Drive, Part 2 - Fujitsu Stylistic 3400 Technical Reference Manual

4. Using your thumbs, push back on the two corners of the hard drive at the locations indicated in Figure
A-3:. Using firm pressure, push the hard disk drive towards the edge of the system. The small foam
inserts on the end of the hard disk tray offer sufficient "give" for the drive to be removed without
damaging the flex cable.
5. While pushing back on the hard drive, lift the connector end out of the tray, as illustrated in Figure
A-4.
6. Remove the hard drive from the tray, as illustrated in Figure A-5. Once the hard disk drive has been
removed from the pen tablet, you can install a new hard disk drive. If you are returning the hard disk
drive for repair, ensure that the packaging material will protect the drive sufficiently during shipment.
85 Replacing the IDE Hard Disk Drive
Foam inserts

Figure A-3: Removing the Hard Disk Drive, Part 1

Figure A-4: Removing the Hard Disk Drive, Part 2