Universal Serial Bus Port; Table 6-5. Universal Serial Bus Port Contact Pin Assignments - Fujitsu Stylistic 3400 Technical Reference Manual

Universal Serial Bus Port

The pen tablet provides a Universal Serial Bus (USB) port that is compliant with the Universal Serial Bus
Specification Revision 1.0. The USB port is a powered USB hub and can support concurrent operation of up
to 127 devices. The Stylistic 3400 pen tablet functions as a USB host and supports high-power,
bus-powered functions as defined in the USB specification. System resources for the USB are assigned by
the operating system, no software configuration is necessary; however, it may be necessary to install
drivers and application software to support your USB device.
The Stylistic 3400 port replicator and mini-dock provide one USB port. The pen tablet can supply a
maximum of 500 mA at 5 volts (or a 5-unit load as defined by the USB specification) on each USB
connector (for a total of 1,000 mA using both USB connectors, one on main unit and the other on the port
replicator, or mini dock, or high usage cradle, or wall mount cradle).
Ensure that your USB configuration does not exceed this maximum load. Note that the conductor gauge
and length of your USB cabling will affect the voltage drop and signal propagation between USB devices.
Refer to the Universal Serial Bus Specification for details on cable requirements or contact your cable
vendor. Also note that some USB devices are self-powered and do not draw power over the USB cable.
Contact pin assignments for the USB port are shown in Table 6-5.

Table 6-5. Universal Serial Bus Port Contact Pin Assignments

Contact Pin Locations
Position 3
Position 4
51 Peripheral Interfaces
Contact
Number
1
Position 2
Position 1
2
3
4
Signal Name
5V Cable power (+ 5 volts DC)
DATA - Data
DATA + Data
GND Cable ground
Signal Description
6