Fujitsu Stylistic LT 800P User Manual

Fujitsu stylistic lt 800p: users guide

Hide thumbs Also See for Stylistic LT 800P:

Installation manual (4 pages)

Installation instructions (1 page)

User manual (2 pages)

Table Of Contents

100

101

102

Table of Contents

Quick Links

DECLARATION OF CONFORMITY

Address: 5200 Patrick Henry Drive, Santa Clara, CA 95054

Complies with part 15 of the FCC Rules

C o p y r i g h t

according to FCC Part 15

Table of Contents

Troubleshooting

Summary of Contents for Fujitsu Stylistic LT 800P

Page 1: Declaration Of Conformity
All other trademarks mentioned herein are the property of their respective owners. Copyright 2003 - Fujitsu PC Corporation. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written consent of Fujitsu PC Corporation.
Page 2 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 3: Table Of Contents
Fujitsu Contact Information ........6...
Page 4 S t y l i s t i c L T 8 0 0 P T a b l e t Care and Maintenance Protecting the Display Screen ........45 Storing the Stylistic LT800P Tablet .
Page 5 Preface...
Page 6 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 7: Preface
Preface About This Guide The Stylistic LT800P Series tablet is a high-performance, pen-based computer that has been designed to support Microsoft Windows XP Professional or Windows 2000. This manual explains how to operate your tablet’s hardware and built-in system soft- ware.
Page 8: Fujitsu Contact Information
Type of device connected, if any Fujitsu Online You can go directly to the online Fujitsu product catalog for your tablet by going to the Fujitsu Web site at: http://www.fujitsupc.com You must have an active internet connection to use the online URL links.
Page 9: Getting Started
Getting Started...
Page 10 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 11: In-Box Items
Getting to Know Your Tablet The Stylistic LT800P tablet is a high-performance, pen-based computer that is designed to work with Microsoft Windows 2000 or Windows XP Professional. This chapter provides an overview of the Stylistic LT800P tablet and its features. In-box Items The following items are included with the Stylistic LT800P tablet: •...
Page 12: Optional Accessories
Serial Adapter Folding Desk Stand AC adapter Stylistic LT Series battery pack (spare, 6-cell) Stylistic LT Series external battery charger Screen protectors (package of 12) Stylistic pens (package of 5) Fujitsu Part Number FPCPR25 FMWCC45 FPCCC14 FPCFDD12 FPCCD19 FMWKB5A FMWKB4A...
Page 13: Stylistic Lt800P Tablet Features
Stylistic LT800P Tablet Features Features and controls that you use to operate the Stylistic LT800P tablet are described briefly below and illustrated in Figures 1-1 and 1-2. Details on using these features and controls are provided later in this manual. Kensington lock slot Air flow vents Suspend/Resume/Power button...
Page 14 S t y l i s t i c L T 8 0 0 P T a b l e t Front / Top / Left Features: • Infrared keyboard port: The infrared port wraps around the front and bottom left of the display, and is used for communicating with a proprietary infrared †...
Page 15 Wireless LAN module cover Wireless LAN On/Off switch Battery Pack Battery Release Switch Air flow vents Charging contacts Mini-dock interface (under cover) Figure 1-2 Stylistic LT800P Tablet Features (Rear View) G e t t i n g S t a r t e d LAN jack (RJ-45) Air flow vents DC input connector...
Page 16 S t y l i s t i c L T 8 0 0 P T a b l e t Rear / Bottom / Right Features: • Wireless LAN module cover: This is an integral part of the back cover, and provides protection for the optional wireless LAN radio solution.
Page 17: Status Display
Status Display Icons appear in the Status display indicating the status of system functions such as system power and battery charge level. The location of icons in the Status display is shown in Figure 1-3 Figure 1-3 Status Display Icons Table 1-1.
Page 18 S t y l i s t i c L T 8 0 0 P T a b l e t Table 1-1. System Status Indicators Icon Mode/State Power • On State • Idle Mode • Suspend-to-RAM • Off State •...
Page 19 Table 1-1. System Status Indicators Battery • On State • Idle Mode • Suspend-to-RAM with AC adapter • Save-to-Disk, with AC adapter • Off State • Suspend-to- RAM, without AC adapter • Save-to-Disk, without AC adapter • Off State • On State Access •...
Page 20 S t y l i s t i c L T 8 0 0 P T a b l e t Table 1-1. System Status Indicators Hovering • On State (Hovering enabled) • On State (Hovering disabled) • Suspend-to-RAM • Save-to-Disk •...
Page 21: Connectors And Peripheral Interfaces
Connectors and Peripheral Interfaces Connectors and peripheral interfaces on the Stylistic LT800P tablet allow you to connect a variety of devices. Specific interface locations are illustrated in Figure 1-4, Figure 1-5, and Figure 1-6. DC Input Infrared port Figure 1-4 Right-Side Connectors and Interfaces Speaker PC Card slot Headphone jack...
Page 22 S t y l i s t i c L T 8 0 0 P T a b l e t Infrared keyboard port Air flow vents LAN port (RJ-45) Figure 1-6 Bottom Connectors and Interfaces Table 1-2 provides a description of each peripheral connector on the Stylistic LT800P tablet.
Page 23 Table 1-2. Peripheral Connectors/Interfaces Connector/ Fig. Tablet Icon Peripheral Ref. IrDA/FIR port Modem Charging Contacts Mini-dock † port LAN Port (RJ-45) Infrared keyboard port † Remove the mini-dock interface cover to access this port. G e t t i n g S t a r t e d Purpose An infrared transceiver built into the tablet allows you to communicate with other...
Page 24 S t y l i s t i c L T 8 0 0 P T a b l e t In addition to the connector and interface icons, there are several icons that illustrate component orientation and buttons. These icons are illustrated in Table 1-3.. Table 1-3.
Page 25: Using The Stylistic Lt800P Tablet
Using the Stylistic LT800P Tablet...
Page 26 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 27: System States
Using Your Stylistic LT800P This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic LT800P tablet. You should familiarize yourself with this information before you attempt to operate the system. System States Before you begin using the Stylistic LT800P tablet, review the different system states (or modes) that the tablet can use.
Page 28 S t y l i s t i c L T 8 0 0 P T a b l e t Note: The system consumes the same amount of power whether it is in Save-to-Disk mode or the Off state. Your system may be configured to enter some of these states automatically after a period of inactivity to conserve battery power.
Page 29: Powering Up The Tablet
Powering Up the Tablet Follow the procedure below to start the Stylistic LT800P tablet. Before you begin, confirm that the system is in the Off state. To do so, observe the Status display. If the Power icon is not visible in the Status display, the system is in the Off state or in Save- to-Disk mode and it is safe to perform this procedure.
Page 30 S t y l i s t i c L T 8 0 0 P T a b l e t To suspend system operation: 1. Press the Suspend/Resume button, or carry out the Standby command from your operating system or power management program. (If your system is configured to suspend operation using Save-to-Disk mode, which is explained later in this procedure, a message is displayed while data is saved to your hard disk.) If you are replacing the battery pack, wait until system is off or system...
Page 31 If you have successfully performed this procedure, system operation is now suspended. Refer to “Resuming System Operation” later in this chapter to resume system operation. Also, note the following with regard to suspending system operation: • If the battery goes dead while the system is in Suspend-to-RAM mode, data loss could occur.
Page 32: Resuming System Operation
S t y l i s t i c L T 8 0 0 P T a b l e t • Suspending system operation interrupts data communications; therefore, some programs may block the system from suspending to prevent an interruption. •...
Page 33: Using Hotpads
Using Hotpads The Hotpad area consists of several pen-active “keys” on the right side of the system display that you can use to change several settings. The hotpads allow you to: • Adjust the display and speaker settings • Invoke right mouse button •...
Page 34 S t y l i s t i c L T 8 0 0 P T a b l e t A summary of each hotpad’s function is given below. Note: Equivalent key codes are included for applicable hotpad keys. These can be used when a keyboard is connected.
Page 35 Table 2-2 Hotpad Keys Icon Name Hovering Speaker Volume Down Speaker Volume Up Speaker Volume Mute Brightness Down Brightness U s i n g Y o u r T a b l e t P C Description Switches the hovering mode on or off. Throughout the hovering mode, the hovering status indicator is lit green.
Page 36: Using The Pen
S t y l i s t i c L T 8 0 0 P T a b l e t Using the Pen You can use the Stylistic LT800P pen to generate and create electronic “ink”, to select items, and to navigate through programs on the tablet. The pen can be used like a two button mouse when used in conjunction with the right-mouse button hotpad.
Page 37 Pen calibration may be required due to the following situations: • The pen is being used for the first time. • The previous user of the Stylistic LT800P tablet writes with the opposite hand or at a different pen angle. •...
Page 38: Using Hovering Mode
S t y l i s t i c L T 8 0 0 P T a b l e t Replacing the Pen With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
Page 39: Removing And Installing The Battery Pack
Table 2-3 Battery Pack Charging Time Battery Pack Charge Level Reached 100% * Actual charge time will be determined by the applications in use. Also note the following with respect to charging the battery pack: • You can use the system, suspend system operation, or shut down and turn off the system without interrupting the charging process;...
Page 40 S t y l i s t i c L T 8 0 0 P T a b l e t 2. Slide the spring-loaded battery release switch in the direction indicated in . 3. While holding the switch, slide the battery pack away from the top of the system, as indicated in .
Page 41: Tips For Conserving Battery Power
Tips for Conserving Battery Power You can extend the charge life of your battery pack by conserving battery power. Battery life is dependent upon a number of factors: operating system, power settings, and applications or peripherals in use. Here are some suggestions to help you conserve battery power: •...
Page 42: Modem Connection
• Actual speeds over U.S. telephone lines vary, and are less than 56Kbp due to the current FCC regulations and line conditions. The internal modems on all Fujitsu tablets from Fujitsu PC Corporation are only qualified for use with telephone systems in selected countries, including the United States and Canada.
Page 43: Starting Bios Setup
The BIOS Setup utility is a program that allows you to change your system’s BIOS settings. The BIOS Setup application is stored in the system’s CMOS memory. The BIOS Setup utility configures device control parameters (such as changing I/O addresses and boot devices) and system data security parameters such as passwords. Starting BIOS Setup To start BIOS Setup, 1.
Page 44 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 45: Care And Maintenance
Care and Maintenance...
Page 46 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 47: Protecting The Display Screen
To obtain additional screen protectors use Fujitsu part number FMWSP11 (12-pack) when ordering. (These and other accessories can be ordered from the FPC Web site at www.fujitsupc.com.) Additional information about installation is included with the...
Page 48: Storing The Stylistic Lt800P Tablet
S t y l i s t i c L T 8 0 0 P T a b l e t 4. Apply pressure to the screen protector with your finger using a continuous wiping motion along the edges. The adhesive sets completely within 48 hours. To ensure a good seal between the screen protector and the display, do not lift the screen protector from the display once it has been applied.
Page 49: Troubleshooting
Troubleshooting...
Page 50 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 51: System Will Not Resume Operation
Troubleshooting Your Stylistic LT800P Solutions to some common problems are described in the following sections. If you are experiencing a problem with your tablet that you cannot solve by taking the actions described, contact your local help desk or your reseller for further assistance. System Will Not Resume Operation If the system will not resume operation after system operation has been suspended, check the following possible causes:...
Page 52: Cursor Is Not Tracking Pen
S t y l i s t i c L T 8 0 0 P T a b l e t • The distance between the two devices must not be more than approximately 3 feet or 1 meter. • The viewing angle from the IrDA port on the tablet must not be more than 15 degrees from a center line between the IrDA port on the tablet and the IrDA port on the other device.
Page 53: Hardware Specifications
Hardware Specifications...
Page 54 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 55: Stylistic Lt800P Tablet Specifications
Stylistic LT800P Hardware Specifications The following table provides general hardware specifications of the Stylistic LT800P by category. Stylistic LT800P Tablet Specifications Dimensions 9.6” w x 6.3” d x 1.1” h (244mm x 160mm x 28mm) Weight 2.70 lb. (1.22 kg) with 6 cell battery Ultra low voltage (ULV) Mobile Intel Pentium III processor - M with enhanced SpeedStep technology, 866/400 MHz Chip set...
Page 56 S t y l i s t i c L T 8 0 0 P T a b l e t Stylistic LT800P Tablet Specifications (Continued) Display PC Card Slot Integrated Interfaces Modem/LAN Infrared Audio User Controls Status Indicators (LEDs) 8.4”...
Page 57 Stylistic LT800P Tablet Specifications (Continued) Main Battery • 6-cell • Removable, Lithium ion • 10.8 V @ 3400 mAh • Warm-swappable • Recharge Time: Suspend/Off: 3 hours (90%), 4 hours (100%) Operating (slow charge): 8 hours (100%) • Suspend Life: Minimum 5 days Off State: Approximately 20 days from full charge Operating: 5 Temperature...
Page 58 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 59 Agency Notices...
Page 60 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 61: Agency Notices
Agency Notices NOTICE Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation.
Page 62 If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu PC Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 63 Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
Page 64 Les réparations de l’équipement de télécommunications doivent être eVectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur décon- necte l’équipement de la ligne téléphonique.
Page 65 UL NOTICE This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 16 VDC, with a current of 3.75 A. AC Adapter output polarity: When using your modem equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: •...
Page 66 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 67: Using The Integrated Wireless Lan
Appendix Using the Integrated Wireless LAN* *Optional Device...
Page 68 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 69: Fcc Regulatory Information
FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
Page 70 NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu PC Corporation may invalidate the user's right to operate this equipment.
Page 71: Before Using This Device
Before Using This Device Thank you for purchasing a Fujitsu LT800P tablet with the optional Integrated Wireless LAN. This manual describes the basic operating procedures for the Wireless LAN (referred to as the “device” in this manual) and how to set up a wireless LAN network.
Page 72: Infrastructure Mode
S t y l i s t i c L T 8 0 0 P T a b l e t Infrastructure Mode If a number of computers are connected simultaneously in the AdHoc mode, the transfer rate may be reduced, communications may become unstable, or the network connection could fail.
Page 73: Connecting Windows 2000 Systems
Connecting Windows 2000 Systems This chapter describes how to set the wireless LAN connection for computers running Windows 2000. If you purchased a Stylistic LT800P tablet with the optional integrated wireless LAN device, the device and drivers have already been installed. This procedure outlines the steps for setting the device parameters.
Page 74 S t y l i s t i c L T 8 0 0 P T a b l e t Item Enter the system file name in which the parameter information is Profile to be saved. Ad Hoc Network: Click the down arrow and select “802.11 AdHoc”.
Page 75 Item Click the down arrow and select an encryption option. Disable: Disables the encryption. In this case, “Create keys with Passphrase” and subsequent items are greyed out, and you cannot enter anything. Encryption 40 bit*: The encryption is set. Select either “Create keys with (WEP) Passphrase”, “Create keys manually”, or “ASCII Input”, and enter the encryption keys.
Page 76: Network Connection: Windows 2000
S t y l i s t i c L T 8 0 0 P T a b l e t When you finish your entry, click [Apply]. 8. Click [OK]. [PRISM Wireless Settings] closes. You have completed the parameter settings. When using ADSL (PPPoE) with the infrastructure network to connect to the Internet, you must change the computer’s MTU size set.
Page 77 4. Perform the following steps. Click [Internet Protocol (TCP/IP)]. Click [Properties]. The [Internet Protocol (TCP/IP) Properties] window appears. 5. Set an IP address as indicated in Table 3. Ask your network administrator to check the setting. Item Set the IP address and subnet mask: Click [Use the following IP address], and enter a value for [IP For AdHoc address] and [Subnet mask].
Page 78 S t y l i s t i c L T 8 0 0 P T a b l e t Item A name to identify the computer on the network. You can specify any Full Computer name to each computer. Name For easier identification, use the model name or user name.
Page 79 3. Right click the [Local Area Connection], then click [Properties] from the menu that appears. [Local Area Connection Properties] appears. More than one network adapter is installed in your system if more than one [Local Area Connection] entry is displayed. In this case, select the [Local Area Connection] entry with [Intersil PRISM Wireless LAN PCI Card] displayed under [Device Name].
Page 80 S t y l i s t i c L T 8 0 0 P T a b l e t Item You can specify a share name for the drive or folder that you want Share name to share. You can enter the description for the drive or folder that you want Comment to share.
Page 81 Checking the Connection After the network setting is completed, access the shared drive on another computer to check the connectivity of the wireless LAN network. Accessing Another Computer 1. Double-click the [My Network Places] icon on the desktop. [My Network Places] appears.
Page 82 S t y l i s t i c L T 8 0 0 P T a b l e t Checking the Connectivity 1. Click [Start] -> [Settings] -> [Control Panel]. 2. Double-click the [PRISM Settings] icon. [PRISM Wireless Settings] appears. 3.
Page 83: Connecting Windows Xp Systems
Connecting Windows XP Systems This chapter describes how to set up the wireless LAN connection for computers that are running Windows XP. If you purchased a Stylistic LT800P tablet with the optional integrated wireless LAN device, the device and drivers have already been installed. This procedure outlines the steps for setting the device parameters.
Page 84 S t y l i s t i c L T 8 0 0 P T a b l e t 6. Perform the following steps. Make sure that [Use Windows to configure my wireless network settings] is checked. Click [Add] under [Preferred networks]. [Wireless Network Properties] appears. 7.
Page 85: Network Connection
8. When you finish your entry, click [OK]. [Wireless Network Connection 2 Proper- ties] appears again. 9. Make sure the network name you specified for the SSID in Step 7 is added under [Preferred networks]. Network Connection The section describes how to set the network connection for a computer running Windows XP.
Page 86 S t y l i s t i c L T 8 0 0 P T a b l e t If you have changed the setting, [Close] is shown instead. Click [Close]. 6. Close [Network Connection]. Checking the Full Computer Name and Workgroup 1.
Page 87 Setting [File and Printer Sharing for Microsoft Networks] 1. Click [Start] -> [Control Panel]. Make sure the Classic View is selected. 2. Double-click the [Network Connection] icon. 3. Right click the [Wireless Network Connection], and then click [Properties] from the menu that appears.
Page 88 S t y l i s t i c L T 8 0 0 P T a b l e t 5. Check [Share this folder on the network]. Uncheck [Allow network users to change my files], if the shared folder is for read only. 6.
Page 89 Checking the Connectivity 1. Click [Start] -> [Control Panel]. 2. Double-click the [PRISM Settings] icon. [PRISM Wireless Setting] appears. 3. Check the connectivity on the [Link] tab. The current condition of connection is displayed. Item Shows the current condition of connection. The MAC address of the other computer that you are connected State to is displayed, when the connection is successfully made.
Page 90: Troubleshooting
S t y l i s t i c L T 8 0 0 P T a b l e t Troubleshooting This section contains troubleshooting information, including causes and actions, for problems you may find while using this device. Troubleshooting Table Problem Possible Cause...
Page 91 Problem Possible Cause Other computers The TCP/IP are not displayed protocol is not when the [Network installed, or, the IP Computer] icon is address is not set double-clicked. correctly. (continued) No communication due to poor radio signal. U s i n g t h e W i r e l e s s L A N Possible Solution If the TCP/IP protocol is installed, do the following to check the IP address:...
Page 92 S t y l i s t i c L T 8 0 0 P T a b l e t Problem Possible Cause IP packet isn’t Run the PING reaching its command to check destination the connection Possible Solution Perform the following steps to run the PING command to check if the IP packet is correctly delivered to the destination.
Page 93 Problem Possible Cause IP packet isn’t reaching its destination (continued) Cannot connect to There are several the network possible causes, as listed to the right. Refer to the specific section of this manual or your user’s manual. U s i n g t h e W i r e l e s s L A N Possible Solution Example: if the destination IP address is 10.0.1.3:...
Page 94 S t y l i s t i c L T 8 0 0 P T a b l e t Problem I want to remove Windows 2000: the driver When removing the driver, make sure the device is attached to (Windows 2000) the computer.
Page 95 Problem I want to remove Windows XP: the driver When removing the driver, make sure that the device is attached (Windows XP) to the computer. If you try to remove the driver while the device is detached from the computer, the driver is not removed. 10.
Page 96: About Ip Addresses
S t y l i s t i c L T 8 0 0 P T a b l e t About IP Addresses Setting IP Addresses If you are not sure how to set the IP address, refer to the following procedure. If you have an access point (DHCP server) on the network, set the IP address as follows: Windows 2000: [Obtain an IP address automatically] Windows XP: [Obtain an IP address automatically]...
Page 97: Specifications
Specifications Technical Specifications for Integrated Wireless LAN Device Item Network Type Transfer Rate Frequency Range Channels Card Type Security Supported Operating Systems Power Current Maximum number of units recommended for wireless LAN (AdHoc network) U s i n g t h e W i r e l e s s L A N Description IEEE 802.11b 11/5.5/2/1Mbps (auto change)
Page 98 S t y l i s t i c L T 8 0 0 P T a b l e t...
Page 99: Index
DC input connector, 20 DC power connector, 14 display screen is blank, 49 external battery charger, 10 external floppy disk drive, 10 folding deskstand, 10 Fujitsu contact information, 6 Fujitsu online, 6 hard disk drive access icon, 17 headphone, 12 headphone jack, 20...
Page 100 S t y l i s t i c L T 8 0 0 P T a b l e t hotpads, 12, 31 hotpads, using, 31 hovering mode, 36 disabling, 36 hovering mode icon, 18 idle state, 25 infrared data transfer not working, 49 infrared keyboard, 10 infrared keyboard port, 12, 21 interfaces...
Page 101 Save-to-Disk mode, 25, 28, 30 Screen protectors, 10 screen protectors, 10 Serial Adapter, 10 shutting down the system, 27 slip case, 10 solving problems, 49 speaker, 12 status display, 15 battery icon, 17 Charge/DC input icon, 16 hard disk drive access icon, 17 hovering mode icon, 18 icons, 16 power icon, blinking, 26...
Page 102 S t y l i s t i c L T 8 0 0 P T a b l e t...

This manual is also suitable for:

Stylistic lt860p Stylistic lt867p

Fujitsu Stylistic LT 800P User Manual

Preface

Getting Started

Using the Stylistic LT800P Tablet

Care and Maintenance

Troubleshooting

Hardware Specifications

Using the Integrated Wireless LAN

Index

Quick Links

DECLARATION OF CONFORMITY

Troubleshooting

Related Manuals for Fujitsu Stylistic LT 800P

Summary of Contents for Fujitsu Stylistic LT 800P

This manual is also suitable for:

Table of Contents