Create Option Syntax; Reformat Option; Reformat Option Syntax; Table 3-22. Phdisk /Create Option - Fujitsu Stylistic 3400 Technical Reference Manual

/CREATE Option Syntax

The syntax of the PHDISK /CREATE option is:
PHDISK /CREATE [SIZE][/FILE][/PARTITION]
Table 3-22 lists valid examples of the PHDISK /CREATE option.
PHDISK /CREATE /FILE
(or PHDISK /C /F)
PHDISK /CREATE /PARTITION
(or PHDISK /C /P)
PHDISK /CREATE 10240 /FILE
(or PHDISK /C 10240 /F)

REFORMAT Option

The /REFORMAT option resets the pointers in a save-to-disk partition. Use this option after a
save-to-disk operation is terminated by a read or write error.
Note: Only save-to-disk partitions can be reformatted; save-to-disk files cannot. If a hard disk error occurs while
writing to a save-to-disk file, use PHDISK /DELETE /FILE to delete the save-to-disk file. Then, use
PHDISK /CREATE /FILE to create a new save-to-disk file.

/REFORMAT Option Syntax

Table 3-23 lists an example of the PHDISK /REFORMAT option.
PHDISK /REFORMAT /PARTITION
(or PHDISK /R /P)

Table 3-22. PHDISK /CREATE Option

Command

Table 3-23. PHDISK /REFORMAT Option

Command
Description
If no save-to-disk partition exists, PHDISK creates
a save-to-disk file large enough for the current
system configuration.
If a save-to-disk partition exists, PHDISK creates
a save-to-disk file large enough to supplement the
existing save-to-disk partition space. (The file
created provides additional disk space required for
save-to-disk operation.)
Creates a save-to-disk partition using the amount
of memory required as calculated by PHDISK.
Caution
Creating a save-to-disk partition will reformat the
hard disk drive, erasing all data on the disk. You
must back up your hard disk before using PHDISK
to create a save-to-disk partition. To avoid
reformatting your hard disk, use the /FILE
parameter instead of the /PARTITION parameter.
Creates a 10 MB save-to-disk file. The [SIZE]
variable is 10240.
Description
Reformats the save-to-disk partition.
PHDISK Hard Disk Preparation Utility
3
3
3
30