Review Mode - Honeywell Sensepoint XCD Technical Manual

Sensepoint XCD Technical Manual

13.4 Review Mode

The instrument will enter Review mode when the "Enter" switch is activated with the
Magnetic Wand and held for around one second.
Names, displays and descriptions for each review item in Review Mode are shown in the
following table.
Item name
Software version
SRS version
EEP version
Gas
Measuring range
Calibration level
Calibration due
Alarm 1
Alarm 2
Display Description
S/W version of transmitter
S/W version of SRS (watch dog)
EEPROM parameter version
Gas type
A user selected measuring range
Calibration gas level
Estimated time to next calibration
42
SPXCDHMANEN Issue 2
Alarm settings for Alarm 1
Alarm settings for Alarm 2