Accessories - Honeywell Sensepoint XCD Technical Manual

Sensepoint XCD Technical Manual
Diagram 3: Sensepoint XCD Flammable, Toxic and Oxygen Sensor Cartridge

4.3 Accessories

A range of accessories are available to allow use of Sensepoint XCD in a wide variety of
applications. These including mounting brackets, maintenance tools, weather housings,
flow housing, collecting cone, duct mounting kit and sensor junction boxes.
Standard Weather Protection
The Standard Weather Protection (P/N:
SPXCDWP) is designed to protect the sensor
from changes in environmental conditions. This is
recommended to be fitted to a Sensepoint XCD
sensor for outdoor exposed applications,
(supplied with XCD kit).
Pipe mounting bracket
The Pipe Mounting Bracket (P/N: SPXCDMTMB)
is an optional accessory and may be used to
allow the Sensepoint XCD to be installed onto a
dedicated mounting post or existing structure at
the desired location.
Magnetic wand
The magnetic wand (P/N: SPXCDMAG) is used
as a tool to allow the user to communicate with
the Sensepoint XCD transmitter for the purpose
of configuration, calibration and interrogating
system status, (supplied with XCD kit).
Gassing Cap
The Gassing Cap (P/N: S3KCAL) is an optional
accessory that may be temporarily fitted to the
sensor in place of the Weather Protection for Gas
Response checking during commissioning and
routine maintenance.
8
SPXCDHMANEN Issue 2