Control Panel - Two Door (Optional) - Monaco 2009 Knight Owner's Manual

Control Panel – Two Door (Optional)
ON/OFF Button – Turns the

refrigerator on or off.
AUTO/STORE Button – Used to

select energy mode between AUTO
AC, AUTO Gas, or Propane. The
AUTO/STORE button is also used to
save settings.
LED Display – The screen displays

temperature, different modes of
operation, and status messages:
- Temperature in frozen food compartment.
- Temperature in fresh food compartment.
- AUTO AC mode.
- AUTO Gas mode.
- Propane mode.
- Temperature setting.
- Clock.
- Status and error messages.
SET Button – Used to adjust the

temperature range and to set the clock.
Starting Up:
Press the main power ON/OFF button. If the
clock has to be set the LED display will show
flashing horizontal bars "-- --".
WARNING
Before starting the refrigerator, check
that all propane (gas) valves are in the
ON position, this includes the shut off
valve (if equipped) in the rear of the
refrigerator.
8
Setting the Clock:
Press the SET button until figures flash

on the LED display. Hours are on the
left and minutes to the right.
Press the SET button to adjust time.

PM is indicated by a dot under PM on
the LED display.
Save settings by either pressing the

AUTO/STORE button, or waiting 5
seconds (the settings will automatically
save).
Setting the Temperature:
Press the SET button to the desired

temperature setting - 1 to 5. Number 5
is the coldest temperature.
Save settings by either pressing the

AUTO/STORE button, or waiting 5
seconds (the settings will automatically
store).
Selecting Mode of Operation:
The mode of operation ranges between
AUTO AC, AUTO Gas, or propane.
To select automatic operation press

the AUTO/STORE button until AUTO
is displayed. In this mode the system
will automatically select the most
suitable energy source available - AC
or propane operation.
To select propane operation only, press

the AUTO/STORE button until a dot is
indicated above LP.
NOTE
Current mode of operation and the
energy source, AC or propane, will be
indicated by a dot on the LED display.
Automatic Defrost:
The refrigerator will automatically defrost
the frozen and fresh food compartments every
24 hours.
Manual Defrost:
If desired, the refrigerator may be manually
defrosted. A defrost cycle takes about 1 hour,
depending upon the amount of frost in the
refrigerator.
Before defrosting, press the ON/OFF

button to turn off the refrigerator.
Press and hold the AUTO/STORE

button, then press the ON/OFF button.
"dE Fr" will show in the LED display.
Status Message:
At times the LED display may show either
a status message or error message. Refer to
the OEM manual for the list of codes and their
meanings.
WARNING
DO NOT use strong chemicals or
abrasives to clean the refrigerator.
Damage to the protective surfaces will
occur.
NOTE
If the refrigerator will not be in
operation for a period of weeks, it
should be emptied, defrosted, cleaned
and the doors left ajar. The ice trays
should be dried and kept outside the
refrigerator.
031217