Table of Contents
Advertisement
CAUTION
DO NOT move motorhome with
antenna in the raised or partially
raised position and risk damage
by tree limbs or wires. Worm gear
damage or breakage may result.
WARNING
Before raising antenna, make an
outside visual inspection for any
obstructions or overhead electrical
wires. Damage to the antenna, severe
shock, personal injury or death can
occur from inadequate clearance.
Antenna Select
The antenna select
switch (located above
the passenger in an
overhead cabinet)
will select between
the roof antenna or
shore cable.
To Watch TV Using Roof Antenna:
With the button in the ON position, the
input to the TV is set to roof antenna
and the LED will illuminate.
To Watch TV Using Shore Cable:
With the button in the OFF position,
the input to the TV will be set to shore
cable and the LED will be off.
ENTERTAINMENT SYSTEM
The front television entertainment system
consists of a TV and DVD Home Theater
System. All the entertainment components
require 120 Volt AC to operate.
11
To Operate Any Component:
Hook to shore power, start the generator
or turn on the inverter.
Ensure house batteries are fully charged.
Use the battery cutout switch to turn on
interior house power.
Ignition key must be in the OFF position.
INFORMATION
It is necessary to read the individual
component OEM manuals to fully
understand the entertainment system
components.
NOTE
Operation of the entertainment
components is accurate at the time
ON/OFF Antenna
Select Button
of printing. Due to changes in the
entertainment equipment, motorhome
floor plans and the motorhome
electrical systems, operation of various
entertainment components may vary
from what is printed.
NOTE
031293c
Due to different floor plans, changes to
the motorhome and to the televisions,
the input needed (selected by the Input
button) for component operation may
vary from what is printed.
To Watch Main Television from the
Antenna (Sharp Television):
Press the antenna select button to ON.
Turn on TV. Using Input button, select
TV.
Select desired channel.
Use volume control on TV to select
desired sound level.
If Home Theatre sound is desired, turn
DVD player on. Press source button
on DVD player until AUX 1 appears in
window. Press Home Theatre speaker
switch to Home Theatre. Use volume
on DVD player to select desired sound
level. Turn the television volume down
for best results.
To Watch Bedroom Television from the
Antenna (Sharp Television):
Press the antenna select button to ON.
Turn on TV. Useing Input button, select
TV.
Select desired channel.
Use volume control on TV to select
desired sound level.
INFORMATION
To receive local channels television
must be on Air setting (also called TV
or Mono by some manufacturers). This
setting is found in the set-up menu.
In addition, a channel search must be
initiated to scan available channels
in area. Refer to television OEM
manual on how to receive all available
channels in the area.
NOTE
The picture quality from the outdoor
television antenna varies by location
of the station in relationship to the
antenna. If picture quality is poor and
there is no external power supply, try
turning the television antenna select
button OFF and ON.
To Watch Main Television from a Cable
Signal (Sharp Television):
Press the antenna select button to the
OFF position.
Turn on TV. Using Input button, select
TV.
Select desired channel on TV.
Use volume control on TV to select
desired sound level.
Advertisement
Chapters
Table of Contents
Troubleshooting
