Detailed Parameter Description
Step
⑤ Select
Press ▽ .
[
]
Press
DATA SET .
⑥ Select
Press △ .
partial lock
Press
DATA SET .
⑦ Trip reset
Press △
and ▽
simultaneously.
When selecting more than one parameter, repeat steps ③ and ④ before proceeding to step
⑤.
● Canceling parameter lock
If a parameter is erroneously locked, cancel the parameter lock according to the following procedure.
1)
Turn OFF the power supply, and make sure that the LED display turns off. Then, turn ON the
power supply while pressing the MODE
2)
Call [Parameter lock], and change it to
3)
Turn OFF the power supply, and make sure that the LED display turns off. Then, turn ON the
power supply.
Operation panel
Switch
Display on LED
-
66
• Changes stored
• Monitor mode
key.
.
-
Remarks