Panasonic M2X Series Instruction Manual page 29

■ Frequency setting selection method for multi-speed operation
(1) When [ Multi-speed input selection] is set to
input
One type of multi-speed frequency can be assigned to one of the [Frequency
setting selection] terminals.
operation modes are selected, up to 3-stepped, 4-stepped and 5-stepped
speed operations are enabled, respectively.
Example: 16-speed mode
Ｉ Ｉ Ｉ Ｉ ３
ＯＦＦ
ＯＮ
ＯＦＦ
ＯＦＦ
ＯＦＦ
• "ON" and "OFF" indicate the connection between each frequency setting selection
terminal and the "G" terminal.
• "x" indicates that either "ON" or "OFF" is acceptable.
(2) When [ Multi-speed input selection] is set to
input [Default setting]
You can select frequency by setting a binary number for the frequency setting
selection terminals.
< 4-speed mode >
Ｉ Ｉ Ｉ Ｉ ３
ＯＦＦ
ＯＮ
ＯＦＦ
ＯＮ
<
8-speed mode
Ｉ Ｉ Ｉ Ｉ ３
ＯＦＦ
ＯＮ
ＯＦＦ
ＯＮ
ＯＦＦ
ＯＮ
ＯＦＦ
ＯＮ
When the 4-speed, 8-speed and 16-speed
Control terminal number
Ｉ Ｉ Ｉ Ｉ ４ Ｉ Ｉ Ｉ Ｉ ５
ＯＦＦ ＯＦＦ
× ×
ＯＮ ×
ＯＦＦ ＯＮ
ＯＦＦ ＯＦＦ
Frequency setting
Ｉ Ｉ Ｉ Ｉ ４
0th speed frequency
ＯＦＦ
1st speed frequency
ＯＦＦ
2nd speed frequency
ＯＮ
3rd speed frequency
ＯＮ
>
Ｉ Ｉ Ｉ Ｉ ４ Ｉ Ｉ Ｉ Ｉ ５
ＯＦＦ ＯＦＦ
ＯＦＦ ＯＦＦ
ＯＮ ＯＦＦ
ＯＮ ＯＦＦ
ＯＦＦ ＯＮ
ＯＦＦ ＯＮ
ＯＮ ＯＮ
ＯＮ ＯＮ
- 29 -
Frequency setting
Ｉ Ｉ Ｉ Ｉ ６
0th speed frequency
ＯＦＦ
1st speed frequency
×
2nd speed frequency
×
3rd speed frequency
×
4th speed frequency
ＯＮ
(Binary): Binary
Frequency setting
0th speed frequency
1st speed frequency
2nd speed frequency
3rd speed frequency
4th speed frequency
5th speed frequency
6th speed frequency
7th speed frequency
(1 BIT): 1-bit