Stainless Steel Bumpers - Fleetwood American Dream WIDE BODY 1998 Owner's Manual

19
EXTERIOR MAINTENANCE
Page 5 of 7
WARNING
Mineral spirits is a flammable liquid. Use extreme
care when handling and using. Do not expose to
open flame, sparks, or smoking material. Do not use
mineral spirits in unventilated areas.
Make sure that all areas to be resealed are absolutely dly before applying-
new sealant.
STAINLESS STEEL BUMPERS
The bumpers are corrosion resistant. For routine cleaning, use soap,
ammonia or detergent and water. Rinse with clean water and wipe dry.
CAUTION
Do not use any of the following items on stainless
steel bumpers:
carbon'steel brushes
steel wool
disc or orbital sanding equipment
- To remove stubborn spots and stains, use ani cleaner recommended for
stainless steel or a non-chlorine household cleaner. Apply with a damp sponge __
or cloth, rinse thoroughly and wipe dry.
Toremove hard water spots, wipe the bumperwitha cloth dipped in vinegar,
rinse with clear water.
To remove sUlface blemishes and restore
th~
original finish:
1. Use a medium grit buffing wheel such as Bear-Texor Scotch-Brite.
2. Use a low RPM drill motor. Keep the buffing wheelrnnning with the
grain of the bumper material.
3. Use light, even pressure to smoothly feather the blemished area into the
existing finish.
=;;;;;===========
American Dream
====.:.;;;========
. © 1997 Fleetwood Enterprises Inc.
Wide Body
ISSUE DATE: 6/97
All rights reserved