Fleetwood American Dream WIDE BODY 1998 Owner's Manual page 196

43
Page 2 of 3
TRANSMISSION OPERATION
MODE Button
The MODE button is used to invoke special Electronic Control Unit (ECU)
functions, A label adjacent to the MODE buttonidentitles the function
associated with a 1110de change, The mode status will be indicated on the
--
~
. digital display by lighting MODEDN when the function has been selected ..
DO NOT SHIFT Light
This indicator is located on tbe instrument panel. Illumination ofthislight,
accompanied by eight seconds of short beeps from the shift selector,indicates
that sljiftsare being restricted.
The SELECT digit on the display will be blank. Operation may continue in
order to reach service assistance. On push button shift selectors the ECU will
not respond to operator requests since operating limitations are being placed
on the transmission; i.e., upshifts and downshifts may be restricted. Direction
changes will not occur. The ECU will cause the transmission to shift to a safe
gear and Hold-Il).-Range and disengage the lockup clutch.
Reset procedure to clear DO NOT SHIFT light and restore operaticm.
When the DO NOT SHIFT light comes on, a reset procedure can be
performed to clear the system. If necessary, continue to operate the vehicle and
have the transmission checked at the earliest opportunity.
Bring vehicle to a stop at a safelocation and apply parking brakes.
Simultaneously press the UP and DOWN arrow buttons one time.
Press and hold the DISpLAY MODE butfon lmtil a tone is heard. Then
release the button and the transmission will return to the direction attained
prior to clearing the active indicator.
NOTE: If the condition is temporary, the DO NOT SHIFT light
will not come back on and your vehicle will operate in
a
normal manner.
=============
American Dream
============;;;;;
Wide Body -
ISSUE DATE: 6/97
© 1997 Fleetwood Enterprises Inc.
All
rights reserved
I