Engine Operation; Normal Starting Procedure - Fleetwood American Dream WIDE BODY 1998 Owner's Manual

Hide thumbs Also See for American Dream WIDE BODY 1998:
Table of Contents

Advertisement

15
ENGINE OPERATION
Page 1 of 3
SEE CHASSIS OWNER'S MANUAL FOR DETAILS ON ENGINE
OPERATION AND MAINTENANCE.
NORMAL STARTING PROCEDURE
1. Shift transmission to NEUTRAL.
2. Turn ignition switch to the right (clockwise) to the first
position. The WAIT TO START light on the instrument
panel will light up. When the WAIT TO START light
goes out, turn the switch clockwise to the START
position. When) the engine starts, release the switch .. See
"Driver's Controls" for location of WAIT TO START
light .
. Note: The WAIT TO STARTfeature is necessary for engine
intake air preheating. The operating timing interval depends
on
~ngine
and outside air temperature. The light will go off
sooner if the engine is hot and/or the ou(side air tempera ture
is warm.
The engine is equipped with a block heater to aid in cold-weather starting.
Plug-in connections for the engine block heater are located in the electrical
shore cord compartment.
=============
American Dream
======~======
© 1997 Fleetwood Enterprises Inc.
Wide Body
ISSUE DATE: 6/97
All rights reserved
,-

Advertisement

Table of Contents
loading

This manual is also suitable for:

1998 american dream wide body

Table of Contents