44
WASTE WATER SYSTEM
Page 3 of 5
SANs T-FLUSH@ OPERATION
(using sanitizing bottle from kit)
1. Dump holding tanks in the usual manner at an approved station.
2. Leave dump valves open.
3. Attach garden hose to San-T-Flush® attachment.
4, Remove clear plastic bottle.
5. Placeone (1) waste liquefier tablet into screen.
6. Replace the bottle. Hand tighten.
7. Hook water hose to inlet side of the sanitizing bottle cover.
8. Connect the male disconnect to the San-T-Flush®valve (yellow handle).
Turn the valve to "BLACK TANK."
9. Flush black tank until tablet is
213
dissolved.
·10. While water is running, turn the San-T-Hush® valve to "GREY WATER
TANK" and flush untiLthe tablet is dissolved.
11. Turn San-T-Flush® valve to "BLACK TANK."
12. Remove
S:m-
T-Flush® attachment and garden hose ...
13. Remove the sewer hose and cap the outlet.
14. RiI)se out the sewer hose with fresh water and removelhe sewer hose from
the dump station.
Replace sewer or dump station covers.
============~ American Dream =====~=======
©
1997 F!eetwood Enterprises Inc.
Wide Body
ISSUE DATE:
6/97
All rights res8lVed.