Sealant Renewal; Door, Window, Roof Component & Molding Resealing - Fleetwood American Dream WIDE BODY 1998 Owner's Manual

19
Page 4 of7
EXTERIOR MAINTENANCE
SEALANT RENEWAL
The adhesives and sealants used in the construction of your motor home
were developed to remain waterproof under sustained effects of weather and
vibration. However, even the finest materials will eventually dry out and lose
their effectiveness under cOnstant heat of the sun and attack by other elements.
This section outlines the procedures you must follow to maintain the weathc
erproof integrity of your motor home. Leak damage caused by failure to follow
these procedures will affect your warranty coverage.
Your dealer can performthe resealing inspection and work for yqu. Your
dealer also has current information on sealants used in your motor home, and
can recommend the appropriate sealants for you if you prefer to do this work
yourself. Always use the recommended sealants. See the "SPECIFICA- .
TIONS" section of this manual for basic sealant recommendations.
DOOR, WINDOW, ROOF COMPONENT
AND MOLDING RESEALING
Inspect the sealants around windows and
door~
at least every three months.
Also inspect roof vents, other roof components, molc\ings at front and rear
caps, and perimeter molding. If any of the following defects are evident during
inspection, the affected areas must be resealed.
Excessive amount of sealant protruding from joints
Sealant cracked
OJ'
peeling
Voids in sealant
NOTE.: 00 not seal the bottom flanges of windows and doors.
Sealant voids ha ve been intentionally leftin the bottom flange
to provide exterior drainage in the event of leakage.
If you find any of the above defects:
1. Use a plastic scraper to remove excess sealant.
2. Clean allareas to be resealed with mineral spirits and clean rags.
=============
American Dream
=============
© 1997 Fleetwbod Enterprises Inc.
Wide Body
ISSUE DATE: 6/97
All rights reserved