---
,.
,/
19
EXTERIOR MAINTENANCE
Page 5 of 7
STAINLESS STEEL BUMPERS
. The bumpers are cQrrosion resistant. For mutine cleaning, USe soap,
ammonia or detergent and watercRinseidth clean water and wipe dry.
CAUTION
Do not use any 6f the fOIlQwing items on stainless
steel bllmpers: . . '
,
carbon steeJ brushes
steel wool
. disc or
orbit~1
sanding equipment '.
Toremove stubborn spots and istains', use any cleaner recommended for
stainlessisteel or a non-chlorine household cleaner. Apply with a damp sponge
or cloth, rinse thoroughly and .wipe dry .. '.
.
_ To
remov~
hard water spots, wipe the bumper with a cloth dipped in vinegar,
rinse with dear water.
.
To remove surface blemishes ana restore the original finish:,
1.
Use a medium grit buffingwheel such asBear-Texor Scotch-Brite.
.
- - ,
~-
, -
2;
Use
a low RPM drill motor. Keep theb~ffing ·wheel running with the
_ . -
,
grain of the bumper material.
3.'Use light, even pressure to smoothly feather the b1emisheq area into the
exi'stirig finish. .
.
Keep in mind the following wpen,eleaning stainless steel:
L Always tub in the direction of the grain linesformaximum effectiveness
and to av.oid marring, the surface. '
========= ...... ===
Am.erican Eagle
~
Wide
Body-
©
1
~97
FleetvJood Enterprises Inc.
ISSUE DATE: 6/97
All rights re$et"'led '