Special Commands; Pause Duration; Begin New Rule; Save Rule - Motorola LI4278 Product Reference Manual

12 - 8 LI4278 Product Reference Guide

Special Commands

Pause Duration

Use this parameter, along with
pause by scanning a two-digit number (i.e., two bar codes) from
second intervals. For example, scanning bar codes 0 and 1 inserts a 0.1 second pause; 0 and 5 inserts a 0.5
second delay. To correct an error or change a selection, scan

Begin New Rule

Scan the bar code below to start entering a new rule
.

Save Rule

Scan the bar code below to save the rule.
Send Pause on page 12-30,

Pause Duration

Begin New Rule

Save Rule

to insert a pause in the data transmission. Set the
Appendix D, NUMERIC BAR CODES
Cancel on page D-3.
in 0.1