Special Commands; Pause Duration; Begin New Rule; Save Rule - Motorola Symbol DS3407 Reference Manual

Hide thumbs Also See for Symbol DS3407:

Table of Contents

Symbol DS3407 Product Reference Guide

Special Commands

This parameter, along with the Send Pause parameter on

a pause by scanning a two-digit number (i.e., two bar codes) from

0.1 second interval in the range of 0.1 to 9.9. For example, scan bar codes 0 and 1 to insert a 0.1 second pause; 0

and 5 to insert a 0.5 second delay. The default is 1 second. To correct an error or change a selection, scan

Cancel on page

Scan this bar code to start entering a new rule

Scan this bar code to save the rule.

12-34, inserts a pause in the data transmission. Set

Appendix D, Numeric Bar Codes

Pause Duration

Begin New Rule

representing a