Code 39 Full Ascii Conversion; Code 39 Buffering - Scan & Store - Motorola LI4278 Product Reference Manual

11 - 32 LI4278 Product Reference Guide

Code 39 Full ASCII Conversion

Parameter # 17
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To
enable or disable Code 39 Full ASCII, scan the appropriate bar code below.
Enable Code 39 Full ASCII
NOTE You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is therefore described in the ASCII
Character Set Table for the appropriate interface. See the
or the
Code 39 Buffering - Scan & Store
Parameter # 113
This feature allows the linear imager scanner to accumulate data from multiple Code 39 symbols.
Selecting the Scan and Store option (Buffer Code 39) temporarily buffers all Code 39 symbols having a leading
space as a first character for later transmission. The leading space is not buffered.
Decoding a Code 39 symbol with no leading space transmits in sequence all buffered data in a first-in first-out
format, plus the "triggering" symbol. See the following pages for further details.
Select Do Not Buffer Code 39 to transmit all decoded Code 39 symbols immediately without storing them in
the buffer.
(01h)
ASCII Character Set for USB on page
*
Disable Code 39 Full ASCII
(00h)
ASCII Character Set for RS-232 on page 7-19
8-18.