Interleaved 2 Of 5 (Itf); Enable/Disable Interleaved 2 Of 5 - Motorola LI4278 Product Reference Manual

Interleaved 2 of 5 (ITF)

Enable/Disable Interleaved 2 of 5

Parameter # 6
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5
length from the following pages.
Enable Interleaved 2 of 5
Set Lengths for Interleaved 2 of 5
Parameter # 22, 23
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a
specific range. The range for Interleaved 2 of 5 lengths is 0 - 55. The default is 14.
One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a selected length.
•
Select the length using the numeric bar codes in
decode only I 2 of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1
followed by 4. To correct an error or to change the selection, scan
Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols containing either of two
•
selected lengths. Select lengths using the numeric bar codes in
For example, to decode only I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection,
scan
Cancel on page
Length Within Range - Select this option to decode an I 2 of 5 symbol with a specific length
•
range. Select lengths using numeric bar codes in
to decode I 2 of 5 symbols containing between 4 and 12 characters, first scan I 2 of 5 - Length Within
Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or
change the selection, scan
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters within the
•
linear imager scanner's capability.
NOTE Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the
code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this,
select specific lengths (I 2 of 5 - One Discrete Length, Two Discrete Lengths) for I 2 of 5 applications.
(01h)
D-3.
Cancel on page
*
Disable Interleaved 2 of 5
Appendix D, NUMERIC BAR
Cancel on page D-3.
Appendix D, NUMERIC BAR
Appendix D, NUMERIC BAR CODES.
D-3.
SYMBOLOGIES 11 - 41
(00h)
CODES. For example, to
CODES.
For example,