Codabar (Nw - 7); Enable/Disable Codabar; Set Lengths For Codabar - Motorola LI4278 Product Reference Manual

Codabar (NW - 7)

Enable/Disable Codabar

Parameter # 7
To enable or disable Codabar, scan the appropriate bar code below.
Enable Codabar

Set Lengths for Codabar

Parameter # 24, 25
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within
a specific range. The default is 5 to 55.
One Discrete Length - Select this option to decode only Codabar symbols containing a selected length.
•
Select the length using the numeric bar codes in
decode only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1
followed by 4. To correct an error or to change the selection, scan
Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two
•
selected lengths. Select lengths using the numeric bar codes in
For example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan
Length Within Range - Select this option to decode a Codabar symbol with a specific length
•
range. Select lengths using numeric bar codes in
to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length
Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an
error or change the selection, scan
Any Length - Scan this option to decode Codabar symbols containing any number of characters within
•
the linear imager scanner's capability.
(01h)
Cancel on page D-3.
Cancel on page
*
Disable Codabar
(00h)
Appendix D, NUMERIC BAR
Cancel on page D-3.
Appendix D, NUMERIC BAR
Appendix D, NUMERIC BAR CODES.
D-3.
SYMBOLOGIES 11 - 47
CODES. For example, to
CODES.
For example,