Msi; Enable/Disable Msi; Set Lengths For Msi - Motorola LI4278 Product Reference Manual

MSI

Enable/Disable MSI

Parameter # 11
To enable or disable MSI, scan the appropriate bar code below.
Enable MSI

Set Lengths for MSI

Parameter # 30, 31
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a
specific range. The default is 4 to 55.
One Discrete Length - Select this option to decode only MSI symbols containing a selected length.
•
Select the length using the numeric bar codes in
decode only MSI symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by
4. To correct an error or to change the selection, scan
Two Discrete Lengths - Select this option to decode only MSI symbols containing either of two
•
selected lengths. Select lengths using the numeric bar codes in
For example, to decode only MSI symbols containing either 2 or 14 characters, select MSI - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection,
scan
Cancel on page
Length Within Range - Select this option to decode a MSI symbol with a specific length range.
•
Select lengths using numeric bar codes in
decode MSI symbols containing between 4 and 12 characters, first scan MSI - Length Within Range.
Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change
the selection, scan
Any Length - Scan this option to decode MSI symbols containing any number of characters within the
•
linear imager scanner's capability.
(01h)
D-3.
Cancel on page D-3.
*
Disable MSI
Appendix D, NUMERIC BAR
Cancel on page D-3.
Appendix D, NUMERIC BAR
Appendix D, NUMERIC BAR CODES.
SYMBOLOGIES 11 - 51
(00h)
CODES. For example, to
CODES.
For example, to