Inserting/Removing Linear Imager Scanner In The Cr0078-P Cradle - Motorola LI4278 Product Reference Manual

Ensure the desk/wall mount converter knob is in the position shown in
3.
Desk/Wall
Mount
Converter Knob
Vertical Mount - Inserting the Linear Imager Scanner in the Cradle
Figure 1-11

Inserting/Removing Linear Imager Scanner in the CR0078-P Cradle

To insert the scanner in the Presentation Cradle:
Insert the scanner by placing the bottom of the scanner, at a slight forward angle, into the CR0078-P
1.
cradle.
Push the handle back and down until it clicks, engaging the contacts of the scanner and cradle.
2.
Inserting the Linear Imager Scanner in the Presentation Cradle
Figure 1-12
To remove the scanner from the Presentation Cradle:
Remove the scanner by pushing the scanner slightly forward and up out of the CR0078-P cradle.
1.
1
2
Click
GETTING STARTED 1 - 15
Figure 1-11.